Bully Dog 53204 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 3)

2
RFI COLD AIR INTAKE
Parts Description
RFI Lid
The easy-to-remove lid
replaces the stock lid and
allows for hassle-free filter
maintenance. When the
lid is installed, the latch
mounts should line up with
the latches on the base.
This will ensure that the lid
creates a good seal with the
enclosure base and that the latches close securely.
RFI Base
The base of the enclosure is designed to bring in large
amounts of cool air from outside the engine bay, keeps
it separate from the hot environment under the hood and
houses the air filter. There are two features to notice about
the enclosure to ensure a smooth and effective installation: (1)
the circular hole on the back of the base, where the RFI MAF
tube will snap in and (2) the circular holes in the bottom where
rubber grommets from the stock intake will be attached.