beautypg.com

Rfi cold air intake – Bully Dog 53204 Rapid Flow Induction (RFI) Cold Air Intake User Manual

Page 13

background image

12

RFI COLD AIR INTAKE

3. Install the air filter.

a. Connect it to the end of the MAF tube that is inside

the RFI base.

b. Tighten the band clamp. (Use a flat-head

screwdriver.)

4. Install the RFI Lid.

a. Make sure the lid is properly aligned.
b. Snap the latches over the mounts on the lid.

5. Reinstall the engine cover.

6. Reconnect the MAF sensor plug and the battery. Start

the vehicle, listen for leaks and check all connections.

Go for a ride and enjoy!