brite-View Air Sync3D BVW-200 User Manual User Manual

Page 19

Step 5: Mounting the BVW‐200 to the Wall

(1) Refer the drawing of the bottom page that

have relative position of the main holes and
attach this paper on wall.

(2) Drill pilot holes.

(3) Insert the supplied two Anchors into the

wall.

(4) Insert two screws into the anchors. Leave

1/8” length for mounting the Transmitter or
receiver.

(5)

(6) Place BVW‐200 main holes over the

protruding screws and slide down into
position.