brite-View Air Sync3D BVW-200 User Manual - Manual (Page 12)

11
3.
Installation
Step1: Setup the BVW‐200T transmitter
Connect Two High‐Definition Audio/Video Sources and a HDTV to the transmitter:
(1) Connect the transmitter’s “HDMI IN” to the High‐Definition AV sources’ “HDMI OUT” through
by HDMI cable.
(2) Connect the transmitter’s “HDMI OUT” to the HDTV set’s “HDMI IN” port with an HDMI cable
for the loop‐through connection.
(3) Connect the supplied power adapter to the DC IN jack of the transmitter and a wall socket. The
LED indicator in the POWER button lights up in blue when the BVW‐200T is connected to the
power mains.