Battery version – BLUESHAPE BSMon v3.0 User Manual
Page 5
4.
The green LED on the CBA unit will turn on to confirm that the unit is properly connected
5.
After the system is installed, the battery can be installed on the V-Lock interface of the BSMon unit.
6.
In case there is need to test a non V-lock battery, get a proper cable ending with banana plugs on one end, and with
proper terminals on the other for connecting with the battery terminals. Connect it to the BSMon unit to start reading.
As for the cable length, shorter is better.
To troubleshoot connection problems, please refer to this
Only the second generation of Blueshape® batteries can be analyzed with this version of BSMon. Read
understand how to recognize the
Battery version
Created with the Standard Edition of HelpNDoc: