Troubleshooting, Battery problems – BLUESHAPE BSMon v3.0 User Manual
Page 19
4: the test halted because terminated by the user or by other event (i.e. sudden battery cut-off)
5: the unit is executing a command and is temporarily unavailable
To understand how to connect the battery, please refer to the
To troubleshoot connection problem, refer to the
section.
Troubleshooting
In this section:
explains how to work around battery related problems.
explains how to work around the most common communication problems.
Battery problems
Battery problems have to be evaluated depending on their specific characteristics.
The battery does not accept any charge.
This means that a charge safety protection has been activated, and the related MOSFET should be turned OFF.
Several reasons could justify this:
Overvoltage
Overtemperature
Undertemperature
Charge Overcurrent
The battery does not allow any discharge.
This means that a discharge safety protection has been activated, and the related MOSFET should be turned OFF..
Several reasons could justify this:
Undervoltage
Overtemperature
Created with the Standard Edition of HelpNDoc: