Installation, Connection, Connect – BLUESHAPE BSMon v3.0 User Manual
Page 4
USB cable
BSMon unit
CBA unit (Computerized Battery Analyzer unit) with the special multicore cable
Installation
Follow the steps to understand how to correctly install and connect BSMon v3.0.
1.
Get the special multicore cable and connect it to the BSMon unit and to the CBA unit, matching the proper side.
2.
Be sure to tighten the screws to lock the cable for power and signal consistency.
3.
At this point plug the USB cable into the USB socket of the main unit and connect the other end to the PC: the
system will auto detect the interface and will automatically load the proper drivers in the system.
Created with the Standard Edition of HelpNDoc: