BLUESHAPE BSMon v3.0 User Manual
Page 31
The tool is operated by clicking on the selected point in the chart and dragging the selection to reach the desired point of
measurement as described below:
3.
when clicking, a dimension line is
established at the original clicked point.
4.
the dimension line will extend following
the mouse movement till the button is
released; during the mouse movement
an indicators pops up to highlight the
distance traveled on the x-axis from the
original point.
3.
when the ending point is reached,
release the mouse.
4.
a small window pops-up at the
top-rightmost edge of the chart area,
showing the result of the capacity
measurement.
The capacity is calculated for the period selected.
If in the selected range of data both charge and discharge currents are found, they are accounted separately.
Pack-level capacity is calculated in mAh (milliAmpere-hour) and Wh (watt-hour)
Cell level capacity is only calculated and Wh (watt-hour) per single cell
The pop-up window is cleared on exiting the Capacity ruler tool.
Created with the Standard Edition of HelpNDoc: