Blizzard Lighting Lucid DMX(Rev A) - Manual (Page 37)

Lucid DMX IV Setup and programming tools
To check that the matrix is working fine, click the "DMX Level" button on the "Tools" tab.
When you modify a RGB value, all the DMX levels are updated, the matrix works fine.
3. 3. How to use the XY Moving Area
To control the X and Y channels, you can use a Moving area.
There is an XY grid with a cursor. The positions are shown on the top of this grid. Under the grid, you
can see a "Center" button, this function centers the light position. The "Resolution" slider selects the
moving speed of the cursor. The X and Y locked check box stops the X or Y movement. When a
joystick is detected the "Joystick" checkbox will be enabled. To control the movement with a Joystick
just enable the checkbox.
Page 33