Blizzard Lighting Lucid DMX(Rev A) - Manual (Page 18)

Lucid DMX III Quick start guide
3. 3. Make the program
The Lucid DMX program architecture is composed of 4 parts. The first one, the basic element, is the
Scene. Scenes can have a FADE time and a WAIT time. The parent element is the sequence, so within
a sequence you have scenes. All the sequences are inside a Cue and all the cues are inside the
Cuelist. In fact your show is the Cuelist.
In live mode you'll be able to control the cues and sequences.
The preset viewer controls all the DMX channels of your fixtures. For each channel you can assign a
new value which will be saved on the current scene.
Select the fixtures that you want to control. Hold the "Ctrl" key to make a multi-selection.
Page 14