beautypg.com

Getting started, Page 3 – Blizzard Lighting EM-Pulse LED Strobe Fixture User Manual

Page 3

background image

Page 3

EM-Pulse User Manual - Rev. A

(c) 2014 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

• 1 x EM-Pulse™

• 1 x Base Plate w/Bracket Mounting Points

• A Sweet Safety Cable & Set of Mounting Brackets

• An Ever-So-Handy Power Cord

• This Lovely User Manual

Getting It Out Of The Box

Congratulations! You are now the proud owner of one intensely bright, multitalented

strobe fixture that is sure blast a ton of fun into your light show! Now that you’ve

got your EM-Pulse™ (or hopefully, EM-Pulse’s!), you should carefully unpack the box

and check the contents to ensure that all parts are present and in good condition. If

anything looks as if it has been damaged in transit, notify the shipper immediately and

keep the packing material for inspection. Again, please save the carton and all packing

materials. If a fixture must be returned to the factory, it is important that the fixture be

returned in the original factory box and packing.

Powering Up!

All fixtures must be powered directly off a switched circuit and cannot be run off a

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer

channel is used solely for a 0% to 100% switch.

AC Voltage Switch - Not all fixtures have a voltage select switch, so please verify that

the fixture you receive is suitable for your local power supply. See the label on the

fixture or refer to the fixture’s specifications chart for more information. A fixture’s

listed current rating is its average current draw under normal conditions. Check the

fixture or device carefully to make sure that if a voltage selection switch exists that it is

set to the correct line voltage you will use.

Warning! Verify that the voltage select switch on your unit matches the line

voltage applied. Damage to your fixture may result if the line voltage applied

does not match the voltage indicated on the voltage selector switch. All

fixtures must be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call. We’ll be happy to help, honest.

Blizzard Lighting

N16 W23390 Stoneridge Dr. Ste E

Waukesha, WI 53188 USA

www.blizzardlighting.com

414-395-8365

Disclaimer: The information and specifications contained in this document are subject to change

without notice. Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions

that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing

document or to create a new document to correct any errors or omissions at any time. You can

download the latest version of this document from www.blizzardlighting.com.

Author:

Date:

Last Edited:

Date:

J. Thomas

6/30/2014

J. Thomas

7/7/2014