Bird Technologies 8921SC13-Manual - Manual (Page 18)

Bird 8920 Series Semiconductor Termaline Coaxial Load Resistor
8
Connecting RF
Power
After installing the load, the RF transmission line can be attached
using standard coaxial line coupling kits.
“QC” Connector Coupling: Use 50 ohm coaxial cable such as
RG-218/U or -220/U (-17A or -19A), appropriate for the frequency and
power level of operation. Use a cable connector which will mate with
the one on the load.
WARNING
Never attempt to connect or disconnect RF equipment from the
transmission line while RF power is being applied.
Leaking RF energy is a potential health hazard.