Bendix Commercial Vehicle Systems SmarTire Trailer-Link Op Manual - Manual (Page 17)

17
3.4.2 Re-Mounting Tires Using Tire Irons
To avoid damaging the sensor, simply mount the tire ensuring that the last
part of the bead to slip over the flange happens directly at the sensor. Start
at one end of the tire and work towards the opposite end with the tire oriented
so that the beads are first pushed under the rim flange directly opposite the
sensor (1) and then worked over the flange toward the sensor (2). The bead
will finally slip over the rim flange at the sensor without contacting it (3).
Repeat for the remaining bead.
1 2 3
Figure 7