Brother DCP-116C - Manual (Page 60)

3 - 16 WALK-UP PHOTOCAPTURE CENTER ™
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you’re using the PhotoCapture Center
™
, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the machine will beep
to get your attention.
Media Error — This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
No File — This message will appear if you try to access a media
card in the drive (slot) that does not contain a .JPG file.
Out of Memory — This message will appear if you are working with
images that are too large for the machine’s memory.
Using PhotoCapture Center
™
from
your computer
You can access the media card that is in the media drive (slot) of the
machine from your PC.
(For Windows ® users, see Chapter 7 in Software User’s Guide on the
CD-ROM and for Macintosh
®
users see Chapter 12 in Software
User’s Guide on the CD-ROM.)