Brother DCP-116C - Manual (Page 58)

3 - 14 WALK-UP PHOTOCAPTURE CENTER ™
2
Load your document.
3
Press ( Scan ).
4
Press or to select Scan to Card.
To change quality, press Set and go to Step 5.
—OR—
Press Mono Start or Colour Start to start scanning without
changing any settings.
5
Press or to select the quality you want.
To change the file type, press Set and go to Step 6.
—OR—
To start scanning, press Mono Start or Colour Start .
6
Press or to select the file type you want.
Press Mono Start or Colour Start to start scanning.
Changing the default quality
1
Press Menu .
2
Press or to select 2.PhotoCapture.
Press Set .
3
Press or to select 8.Scan to Card.
Press Set .
4
Press or to select 1.Quality.
Press Set .
5
Press or to select B/W 200x100 dpi , B/W 200 dpi,
Color 150 dpi , Color 300 dpi or Color 600 dpi.
Press Set .
6
Press Stop/Exit .
Do not take out the media card while PhotoCapture is blinking
to avoid damaging the card or data stored on the card.