Baumfolder 714XA - Manual (Page 28)

PAGE 25 TP10583
This indicates that the paper length and the fold choice are not compatible. Go to the
choice screen or the paper length screen and change one of the selections.
Non- fault status states:
This state shows the machine is
“ready” to start
. On the production
screen pressing the status button in this state will start the machine.
This state shows the machine
is currently running
. Pressing the status button in
this state will request the machine to stop.
This state shows the machine
is in the paper clear mode
. After a regular
stop is requested, this 3 second delay allows the paper in the fold pans to move through
to the delivery before it stops.
This state
shows the fold pans are moving.
This
shows the machine has reached a requested stopping
point.
This state triggers after the summation stop on a single batch is complete or the
requested grouping of variable batches is completed. The operator acknowledges
ready to continue by pressing this button on the production screen. Then it will return
to the ready status (partial green circle).