Tp10583c_english_p15, Length screen, Initialization screen – Baumfolder 714XA User Manual

Page 18: Batch count

PAGE 15 TP10583

Here is an example of the

Length Screen:

After selecting the units and the paper size, Press the NEXT button to change to the

INITIALIZATION SCREEN:

4. After changing to the initialization screen, both pans will move into the deflect position then
back out to the fold position

. While the pans are moving the status icon for

the pans moving will display:

After the pans have reached the requested fold positon, the PANS AT FOLD POSITION

message will appear. You then have a choice of returning to the production screen to

run the job using the or chosing the COUNT SETUP button to change the

batch count or mode.

5. There are several ways to get to the

BATCH COUNT

screen. From the

production screen, press the Batch Screen button if the mode is currently set for NO BATCH.

(See the picture labeled NO BATCH on page 14 item one). If the current mode is set for BATCH

then press any of the numbers to the right of the blue batch icons: