Bang & Olufsen BeoSound Century - User Guide - Manual (Page 7)

7
Loading a CD
Pressing the LOAD button raises the clamp which
holds the CD in place. You can then remove any
CD from the compartment and load the one you
want to play.
Always load the CD with the text side facing you!
Pressing LOAD again lowers the clamp. You may
also press the CD button to lower the clamp and
start playing the CD at once.
Loading a tape
The tape cassette must be loaded with the tape
slot facing downwards. Insert the top section of
the cassette first; then push in the bottom half of
the cassette until it is properly seated in the
compartment.
To unload the tape, grip the sides of the cassette
– a little below the middle – and gently, but
firmly, pull it outwards.
Raises and lowers the clamp which
holds the CD in place
Headphones
Headphone socket
The headphone socket is placed on the back of
BeoSound Century, as illustrated to the left.
Once you connect your headphones to BeoSound
Century, the sound from the built-in BeoSound
Century speakers is muted. The sound from the
speakers is then demuted when you disconnect
your headphones.
PHONES
husk billede
husk billede