Recording a specific track on a cd, Cancelling your recording – Bang & Olufsen BeoSound Century - User Guide User Manual

Page 19

Recording a specific track on a CD

The system also allows you to start
recording from a specific track on a CD.

Press STOP to pause the CD player.
Then press the REC button and key in
the track number you wish to record,
using either the number buttons, 0-9, or
the step buttons,

STEP or STEP

. The

track number is indicated in the display.

When you press REC again, the tape
recorder starts recording from the
beginning of the CD track you have
chosen to start from.

To pause or stop recording, just press
the STOP button once or twice.

Start playing the CD

then

Press to pause the CD player

Press to make the tape recorder
ready for recording

then

Key in the track number you want,
for example track number 4

then

Press again to start recording from
the track you have chosen

By the end of the track, pause or
stop your recording in the usual way

STOP

REC

Cancelling your recording

If you regret your recording, simply
press the step button,

STEP, while

recording is in progress.

Recording is stopped, and the tape is
rewound approximately to the spot
where your recording started.

When you have found the exact spot,
you may either stop the tape recorder
altogether, by pressing STOP; or
resume recording, by pressing REC.

Note: We recommend that you listen-in on the
tape to find the exact spot before you resume
recording.

Note: If you wish to erase a recording, you may do
so by pressing TAPE, STOP then REC, REC. As no
source other than the tape recorder is active,
nothing is recorded on the tape.

Press, while recording is in progress,
to cancel your recording and return
approximately to the spot where it
started

STEP