Bang & Olufsen BeoSound Century - User Guide - Manual (Page 15)

15
Switching displays
When you start playing a CD, the
display always shows which track
number is playing.
At any time, while the CD is playing,
you can change the indication in the
display by pressing the CD button. The
display then changes – first into
showing the track time, then into
showing the remaining disc time
(minutes and seconds).
If you press CD a third time, the display
reverts to showing the track number.
The CD player is playing track number 12
The current track has been playing for 1 minute
and 47 seconds (track time)
12 minutes and 38 seconds playing time remains
on the CD (remaining disc time)
Press while the CD is playing to
change the display indication – from
track number to track time
then
Press again to change the display
indication – from track time to
remaining disc time
then
Press a third time to revert to the
original track number indication
CD
CD
CD
Playing tracks in random order
Pressing the MODE button twice, while
the CD is playing, makes the CD player
play all the tracks on the CD in random
order.
If you wish to cancel your random play
instruction, simply press MODE again –
twice. Switching off the CD player also
cancels the random play function.
Press while the CD is playing to see
the current status in the display
then
Press to cut the random play
function in or out
The CD random play function is switched off
– the indication in the display is blinking
The CD random play function is active
– the indication in the display is rotating
Note: The display reverts to showing track number
or track time. While playing tracks in random
order, it cannot be set to showing remaining disc
time.
Note: You can always skip the track you are
listening to by pressing STEP
> . The CD player then
continues to the next random track.
MODE
MODE