Bang & Olufsen BeoSound Century - User Guide - Manual (Page 27)

27
Press to raise the volume
Press to lower the volume
Press
∧
and
∨
simultaneously to
silence the speakers completely;
press again to recall the sound
Sound adjustments…
Press LIST repeatedly to reveal
A.SETUP
*
After pressing GO, SOUND is
revealed…
Press GO repeatedly to access
the sound cues Volume, Balance,
Bass, Treble, or Loudness; refer to
the BeoSound Century display for
information regarding adjustment
Press
∧
or
∨
to adjust the
individual elements
Repeat this procedure for the sound
elements you want to adjust…
Then, store your adjustments…
Press LIST to reveal A.SETUP
Press LIST repeatedly to display
S.STORE
Switches off
With respect to adjusting sound, you
choose the relevant sound elements on
the Beo4 and adjust them accordingly,
see how to do it on the far right of this
page.
At any time, while the BeoSound
Century is playing, you can light the
buttons on the system briefly by
pressing the MENU button on Beo4. If
you press MENU twice, the light
remains on until you switch the system
to stand-by – or until you press MENU
again.
Note: To be able to play any auxiliary source you
have connected to the BeoSound Century AUX-
socket, you must press LIST on Beo4 to find
A.AUX
in the Beo4 display, then press GO.
*Note: In order to adjust sound and display
A.SETUP
, you must add the function to Beo4,
please refer to the below procedure…
Adding functions to Beo4 list of functions…
• Press and hold down the standby button on
Beo4 while you press LIST to get access to the
special Beo4 setup function and let go of both
buttons at the same time. You are now in the
setup mode.
• Then you press LIST to display ADD? and then
GO which calls up the list of cues you want and
the first cue appears on the display.
• Then you keep on pressing LIST until the cue
you want to add is displayed and then you press
GO to add it. When the cue stops blinking it has
been added.
• The addition has now been completed and you
press EXIT to leave the Beo4 setup function.
Remote control via the BeoLink 1000 terminal is also
available for the BeoSound Century.
or
or
then
LIST
GO
then
LIST
GO
then
LIST
GO
then
then
GO
then
•