Brother FAX-3240C - Manual (Page 82)

REMOTE FAX OPTIONS 6 - 3
Setting your Remote Access Code
The remote access code lets you access the Remote Retrieval
features when you are away from your machine. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is inactive code (---
).
1
Press Menu/Set , 2 , 5 , 2 .
2
Enter a three-digit code using
numbers
0 - 9 , .
Press Menu/Set . (The preset ‘ ’ cannot be changed.)
3
Press Stop/Exit .
Do not use the same code which is set in your Fax Receive
Code (
51 , 91 for New Zealand) or Telephone Answer
Code ( # 51 , # 91 for New Zealand).
(See Operation from extension telephones on page A-14.)
You can change your code at any time by entering a new one.
If you want to make your code inactive, press
Stop/Exit in Step
2 to restore the inactive setting (--- ).
2.Remote Access