Brother FAX-3240C - Manual (Page 49)

3 - 7 SETUP SEND
Fax Resolution
You can use the Fax Resolution key to change the setting
temporarily (for this fax only). In Fax mode , press
Fax Resolution and ▲ or ▼ to select the setting you want, and then
press Menu/Set .
—OR—
You can change the default setting:
1
If it is not illuminated in green, press ( Fax ).
2
Load your document.
3
Press Menu/Set , 2 , 2 , 2 .
4
Press ▲ or ▼ to select the resolution
you want.
Press Menu/Set .
Standard Suitable for most typed documents.
Fine Good for small print and transmits a little
slower than Standard resolution.
S.Fine Good for small print or artwork and transmits
slower than Fine resolution.
Photo Use when the document has varying shades
of gray or is a photograph. This has the
slowest transmission time.
2.Fax Resolution