Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 40)

40
Maintenance
Normal maintenance, such as
cleaning the BeoVision 5, is the
responsibility of the user. To achieve
the best result, follow the instructions
to the right.
Any defective parts are covered by
the guarantee during the warranty
period. Please consult your Bang &
Olufsen retailer to determine
recommendations for normal
maintenance.
Cleaning surfaces…
Wipe dust off the surfaces using a dry, soft
cloth. Remove grease stains or persistent dirt
with a lint-free, firmly wrung cloth, dipped in
a solution of water containing only a few
drops of mild detergent, such as washing-up
liquid.
About the plasma screen…
Clean only with a dry cloth. Do not use liquid
cleaners or aerosol cleaners.
Do not allow still pictures to be displayed on
the screen for an extended period of time, as
this can cause a permanent after-image to
remain on the screen. Examples of still
pictures are logos, video games, computer
images and images displayed in 4:3 picture
format.
NOTE! If the front screen glass should crack or
chip, or if it should be damaged in any way, it
must be replaced immediately, as it could
otherwise cause injury. Please contact your Bang &
Olufsen retailer.
Never use alcohol or other solvents to clean any
part of BeoVision 5!