Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 16)

16
Once your additional video
equipment has been connected and
registered in the Connections menu,
as described on page 26, you can
operate it with the Beo4 remote
control.
If you have connected a set-top box,
you can use the Beo4 remote control
to gain access to the programmes
and functions offered by your set-top
box.
Refer to the BeoVision 5 CD-rom for
further information on how to
connect additional equipment.
Use additional video equipment
Get access to additional video
equipment
Some of the connected equipment is
accessible via the Beo4 remote control.
Press to switch on a video tape
recorder
Press to switch on a DVD or CDV
player
Press repeatedly until V.TAPE2 is
shown in the Beo4 display
Press to switch on a second
video tape recorder
Press repeatedly until V.AUX is
shown in the Beo4 display
Press to switch on a source
registered as V.AUX, e.g. a
set-top box
In order to display V.AUX or V.TAPE2 on Beo4,
these options must be added to the Beo4 list of
functions. Refer to Beo4’s own Guide, for further
information.
Set-top box operation
If you know which Beo4 button activates the
function you want, you can call up the
function without activating the Set-top Box
Controller menu first.
Press GO and the number key
that activates the function you
want
Press GO and then ▲ or ▼ to
step up or down through
programs directly
Press GO and then ss or tt while
the set-top box menu is shown
on the screen to step e.g.
between menu pages or in
program lists
Press and hold GO to bring up
the Program Guide or the
Now-next banner on the screen
depending on your set-top box
When set-top box is selected as source, press
MENU twice to call up the TV’s main menu.
V TAPE
DVD
LIST
V.TAPE2
GO
LIST
V.AUX
GO
GO
0 – 9
GO
▲
▼
GO
ss tt
GO