Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 24)

24
Connect additional equipment
You can connect different types of
audio and video equipment to
BeoVision 5, such as a DVD player,
set-top box or Camcorder.
Audio equipment is connected
through the Master Link socket.
When connecting video equipment to
your BeoVision 5, remember to use
the AV socket on BeoVision 5 first, if
it is vacant. For detailed information
about connections, refer to the
BeoVision 5 CD-rom.
Refer to the user’s guide included
with your additional equipment to
make sure it is connected properly.
Remember to register all connected
equipment. Refer to Register
additional video equipment on page
26 for further information.
Audio Master
Using a BeoLink cable, connect the one multi-
pin plug to the socket marked MASTER LINK
on BeoVision 5, and the other multi-pin plug
to the socket marked MASTER LINK on the
audio system.
AV 2 Expander
The optional AV 2 Expander accessory enables
you to connect more than one piece of extra
equipment to the DECODER socket on
BeoVision 5. You can connect a decoder, a
DVD player, and other equipment to
BeoVision 5 via the AV 2 Expander.
Use a 21-pin cable to connect one plug to the
socket marked TV on the Expander box, and
connect the other plug to the socket marked
DECODER on BeoVision 5.
Set-top box
Use the 21-pin AV cable to connect the set-top
box to your BeoVision 5. To enable remote
control of your set-top box with the Beo4
remote control, you must also connect a low-
power IR transmitter.
Decoder
To connect an AV decoder (a baseband
decoder, e.g. Canal+, or a MAC decoder, etc.),
connect the cable from the aerial to the
BeoVision 5. Connect the AV decoder to the
21-pin socket marked DECODER on
BeoVision 5.
To connect an RF decoder, connect the
external aerial cable to the decoder input
socket and then forward the cable to the
BeoVision 5 aerial socket (marked VHF/UHF).
Connect the RF decoder to the 21-pin socket
marked DECODER on the BeoVision 5.
Video tape recorder
Use a 21-pin cable to connect a BeoCord
V 8000 video tape recorder to the V.TAPE
socket on BeoVision 5. Connect the cable from
the aerial to the input socket on the video
tape recorder. Forward the aerial cable to the
aerial socket on BeoVision 5.
DVD player
Use a 21-pin cable to connect a DVD player,
such as a Bang & Olufsen DVD 1, to
BeoVision 5. Connect one end to the socket
marked AV on your DVD player, and the other
to the socket marked AV on BeoVision 5.
Connect the socket marked DIGITAL OUTPUT
on DVD 1 to the INPUT 1 socket on
BeoVision 5. If the required cable is not
enclosed, it is available from your Bang &
Olufsen retailer.
Video game, Camcorder, etc.
We recommend that you use the direct access
socket panel for equipment you connect on a
temporary basis, e.g. video games or
Camcorder. These sockets are placed on the
left side of BeoVision 5. The use of these
sockets is explained in the chapter Direct
access socket panel on page 29.