Balboa Water Group MLM990H User Guide - Manual (Page 3)

3
EL SERIES CONTROL WITH MLM990H PANEL
The MLM990H panel can be used with the EL8000, EL2000 and EL1000 systems.
System software version 29 or higher is required for full functionality of this panel.
This user guide lists all features that are available. The features shown on your panel
menus may vary depending on the system and equipment used.
Arrow Left
LEDs are lit
when functions
are on
To exit a menu,
Arrow Left
Select
Arrow Down
Arrow Up
Arrow Right
Establishing a Network Connection
Home > Set >
> Link Panel > .
To link your wireless panel to the system, press .
Follow the on-screen instructions:
Shut off power to spa.
Turn spa power back on and
then push select on this
panel within 30 seconds.
Additional screens will follow: “Linking Panel...Wait...”;
then, “Panel Linked Successfully”. “Starting Up” will also
blink. If the “Priming Mode” screen appears, follow the
instructions. You’ll probably choose “Exit Priming Mode”
if you’re simply creating a link from the Wireless Panel
to the Spa Control System. Once completed, “Acquiring
System Config.” will blink on the Home display.
Network/Link another Panel to Control System
Home > Set >
> Network > .
Wireless Network:
1) “Panel ID”. This is a 12 digit unique ID given to wireless
panels when they are added to the system.
2) “Link other Device”. To link to another device such as
another wireless panel or PC based software from an
already added wireless panel, go to “Link other device”,
press Select from an already added panel. Then go to
“Link Panel” on the device that you want to link to on the
spa system. Press Select (
).
3) Unlink All. To unlink/remove all RF devices already
added to the spa system.
NETWORK CONNECTIONS