Ambient Tiny Lockit - ACN TL - Manual (Page 21)

19 www.ambient.de
ACN > TX / RX
TX (formerly TCext) is a wireless transmission of
external time code present on the Lemo/TC input. This
is intended for transmitting a record-run time code to
another ACN-TL or ACL 204 which is in RX mode
(formerly TXRX). Once progressing time code is
detected, the ACN-TL jams to it and sends a jam
command to the slaves.
When external time code stops, a stop command is
sent to the slaves.
If static time code value is recognized, as put out by a
video camera or Sound Devices recorder, the time
code is stopped and a static time code is put out on the
time code output of the slaves as well as on the output
of the unit that is in TX.
Please note that in TX / RX record run time code
mode no sync signal will be generated
This feature makes it possible to remotely start and stop recording of audio recorders, cameras and
video recorders which support being triggered by time code.
As in JAM mode, the network channel needs to be set first when coming from OFF condition but can
be changed any time. Other available settings are selection of internal or external antenna, activating
LNA and setting the output power of the wireless module. PIN is required for external antenna use
and higher output levels.
EXIT
Exits to the main operation screen.