AJA KONA LHi - Manual (Page 42)

KONA v10.5 www.aja.com 42
Updating KONA Firmware
When you update your KONA software by downloading new versions from the aja.com
website, it is possible that some versions may also require a firmware update to update
the software stored in non-volatile memory on the board. Always carefully read the
release notes that accompany each version to be installed. The release notes will spell
out all required software and hardware necessary to ensure a successful update of your
KONA card.
Follow these instructions when a firmware update is required:
1. First install the new version of KONA software.
2. After successfully installing the new KONA software, the AJA KONA Updater will
automatically launch. (The updater application is located in the AJA Utilities folder.)
3. When the updater starts, the following screen will display indicating the current
firmware and update firmware creation date.
Figure 36. Firmware Update Welcome Screen
4. Click Update Firmware to begin the update process. Do not interrupt the update
process