Rockwell Automation T8100 Trusted Controller Chassis - Manual

SDS-8100
Trusted
TM Industrial Control System
Trusted TM Controller Chassis-T8100
Issue 5 Jan 2006
FRONT PANEL
DESCRIPTION
The Trusted
TM Controller Chassis
is designed to accommodate a
maximum of eight single-width
Trusted
TM Interfaces and up to
two triple-width Trusted TM TMR
Processors.
The chassis consists of a
backplane,
power connection
terminals, and the Inter-Module
Bus connectors. The chassis is
6U (10.5ins) high and is either
front mounted in a 483mm (19-
inch) fixed frame or swingframe,
or can be panel (rear) mounted in
a suitable electrical enclosure.
The two slot positions on the left
(as viewed from the front) are for
installing the Trusted
TM TMR
Processors. The eight remaining
slots are for installing the
Trusted
TM Interfaces. Each
module plugs into the chassis
backplane, connecting to the
triplicated
Inter-Module Bus.
Double and single connector
options are available.
The backplane is part of the
Trusted
TM Controller Chassis and
provides electrical interconnection
and other services for the
modules. A triplicated 4-position
DIP switch is provided for user
configuration of the system
identification..
Power connection to the
Trusted TM Controller Chassis is
provided via a 4-pole connector
on the chassis backplate. The
Trusted
TM Controller Chassis is
designed for a nominal dual +24V
dc power supply.
FEATURES
2 x 90mm Trusted TM TMR
Processor slots
8 x 30mm Trusted TM
Interface Module slots
No user-serviceable parts
Fast assembly
Minimum tooling/parts
Up to twelve High Integrity
I/O modules supported per
Trusted
TM Expander
Chassis
Dual redundant power
supplies from the Trusted
TM
High Integrity Power Supply
Unit
Module slot keying
Triplicated Inter-Module
Bus connections
Front or rear (panel)
mounting on 483mm (19-
inch) dimensions
32,48,64 and 96-way
DIN41612 I/O port
connector capability