Brother Printer DCP-J140W User Manual
Page 60

50
3.Network
(Continued)
3.WPS/AOSS
—
—
You can easily configure
your wireless network
settings using the one-
button push method.
See
.
4.WPS w/PIN Code
—
—
You can easily configure
your wireless network
settings using WPS with
a PIN code.
5.WLAN Status 1.Status
Active(11b)
Active(11g)
Active(11n)
AOSS Active
Connection Fail
You can see the current
wireless network status.
2.Signal
—
You can see the current
wireless network signal
strength.
3.SSID
—
You can see the current
SSID.
4.Comm. Mode
—
You can see the current
Communication Mode.
6.MAC Address —
—
You can see your
machine’s MAC address
from the control panel.
7.WLAN Enable —
On
Off*
Lets you use the wireless
network connection.
0.Network Reset —
—
Restore all network
settings to the factory
settings.
Level1
Level2
Level3
Options
Descriptions
Page
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.