Brother Printer DCP-J140W - Manual (Page 55)

Troubleshooting
45
B
Machine Information
B
Checking the serial number
B
You can see the machine’s serial number on
the LCD.
a
Press Menu.
b
Press a or b to choose
5.Machine Info.
Press OK.
c
Press a or b to choose 1.Serial No.
Press OK.
Your machine’s serial number will
appear on the LCD.
d
Press Stop/Exit.
Reset functions
B
The following reset functions are available:
1 Network
You can reset the print server back to its
factory settings, such as the password
and IP address information.
2 All Settings
You can restore all settings to the factory
settings.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.
How to reset the machine
B
a
Press Menu.
b
Press a or b to choose
0.Initial Setup.
Press OK.
c
Press a or b to choose 4.Reset.
Press OK.
d
Press a or b to choose the type of reset,
1.Network or 2.All Settings.
Press OK.
e
Press a to choose a Reset.
f
Press a to confirm.