Brother Printer DCP-J140W - Manual (Page 34)

24
6
Scanning a document
6
There are several ways to scan documents.
You can use the SCAN key on the machine or
the scanner drivers on your computer.
a
To use the machine as a scanner, you
must install a scanner driver. If the
machine is on a Network, configure it
with a TCP/IP address.
 Install the scanner drivers from the
CD-ROM. (uuQuick Setup Guide)
 Configure the machine with a TCP/IP
address if network scanning does not
work. (uuSoftware User’s Guide:
Configuring Network Scanning for
Windows
®
and Configuring network
scanning for Macintosh)
b
Load your document. (See How to load
documents uu page 19.)
c
Do one of the following:
 To scan using the SCAN key on the
machine, go to Scanning using the
SCAN key.
 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver.
Scanning using the
SCAN key
6
For more information
uu
Software User’s Guide: Using the Scan
key
a
Press (SCAN).
b
Press a or b to choose the available
scan modes as follows.
Press OK.
 Scan to E-mail
 Scan to Image
 Scan to OCR
1
 Scan to File
 Web Service
2
(Web Services Scan)
1 (Macintosh)
This function is available after you download
and install Presto! PageManager from
http://nj.newsoft.com.tw/download/brother/
PM9SEInstaller_BR_multilang.dmg
2 (Windows ® only)
(uuSoftware User’s Guide: Using Web
Services for scanning on your network
(Windows Vista
®
SP2 or later and
Windows ® 7))
c
(For network users)
Press a or b to choose the computer you
want to send the data to.
Press OK.
d
Press Black Start or Color Start to
begin scanning.
How to scan to a computer
6