Add the 1769-sdn to the project, Add the 1769-sdn to, The project – Rockwell Automation 1769-L30ER_L30ERM_L30ER-NSE_L33ERM_L33ER_L36ERM CompactLogix 5370 L3 Controllers Quick Start User Manual

Page 71

Rockwell Automation Publication IASIMP-QS023B-EN-P - December 2012

Create a Logix Designer Project Chapter 5

4. Use the tabs to create the

parameters for the I/O module.

5. When the module configuration is

complete, click OK.

The module is added to the I/O
Configuration.

Add the 1769-SDN to the Project

1. Make sure the 1769-SDN DeviceNet scanner module is installed in the

CompactLogix 5370 L3 controller system.

There can be a maximum of three modules between the 1769-SDN module and the
power supply.

2. Right-click 1769 Bus and choose

New Module.

IMPORTANT

For the purposes of this
exercise, make sure you
change the Module Definition
parameters so Electronic
Keying is set to Disable
Keying.