beautypg.com

Rockwell Automation 1440-5AFUSEKIT 5A Fuse Kit User Manual

5a fuse kit, Installation instructions, Description

background image

5A Fuse Kit

Catalog Number 1440-5AFUSEKIT

Installation Instructions

Description

The Fuse Kit limits the available current from listed Safety Extra Low Voltage
(SELV) or Protected Extra Low Voltage (PELV) sources. The kit allows use
of SELV or PELV supplies as an alternative to a listed Class 2 power source
for an Allen-Bradley XM

®

Series Machine Condition Monitoring system.

Technical Data

• Use only Bussmann model MDA-5-R fuse
• Use solid/stranded wire 0.2 - 6 mm2 / 30-10 AWG, wire
• Tightening torque 0.5 - 0.6 Nm / 4.5 - 5.3 lb-in
• Stripping length 10 mm / 0.4 in

Installation Procedure

1. Mount the End Plate and Fuse Holder on a DIN rail.

2. Install one Bussmann fuse into the Fuse Holder.

Retain the second fuse as a spare.

3. Wire per Application Technique ICM-AP005A-EN-E.

Contents

Manufacturer

Part Number

Description

Qty

Weidmuller

WSI 4/2 C1D2

Fuse Terminal

1

Weidmuller

WAP WSI 4/2

End Plate, Fuse Terminal

1

Bussmann

MDA-5-R

Fuse, Ceramic Tube, 1/4” x 1-1/4”

2

WARNING

Disconnect from power source before installing or servicing

In hazardous area applications these instructions must be followed.