Rockwell Automation SP600 REBZL-N1 Bezel Kit - Manual

©2006 Rockwell Automation. All rights reserved.
Using the REBZL-N1 Bezel Kit
Instruction Manual D2-3562
The REBZL-N1 Bezel Kit allows remote OIM (Operator Interface Module) operation and provides an additional
remote DPI port for accessories. The bezel cradle connection is used to mount a NEMA1 OIM and is
designated Port 3. The accessory port on the bottom of the bezel is for standard DPI peripherals such as
RECOMM-232, RECOMM-USB, or another handheld OIM, and is designated Port 2 (just like the accessory
port on the drive). The internal connection on the back side of the bezel is used to connect the bezel to the host
drive using a standard DPI male-to-male cable. The REBZL-N1 Bezel Kit includes mounting screws, cabinet
grommet, and a three (3) meter cable (Note: The OIM is not included.). The kit can be mounted up to nine (9)
meters from the drive using the RECBL-M90 cable or up to 100 meters from the drive using the screw terminal
adaptor kit 1202-CBL-KIT-100M. The REBZL-N1 Bezel Kit cannot be used with a RECBL-SSP two-way splitter
cable.