Rockwell Automation CEP9-ESM-xxx-xxx Sprecher+Schuh CEP9 Sensing Module - Manual

Features
CEP9-ESM-_ _ _-97-100
CEP9-ESM-_ _ _-7T-100
Installation Instructions
CEP9 Sensing Module
(Cat CEP9-ESM-_ _ _-_ _ _)
T3
T2
T1
Contactor
Mounting Foot
CA7 Contactor
Power Stabs
CA7 Contactor Coil Module
CEP9-EIO-CM-97
(Included in Package)
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of
malfunction or damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.
Additional Resources:
1) Go to http://www.literature.rockwellautomation.com; 2) Go to Search. Type in publication number: CEP9-UM015
DIN Rail Release
DIN Rail Mount Panel Mount Holes
L1
L2
L3
T2
T1
T3