Rockwell Automation T8151 Trusted Communications Interface - Manual (Page 2)

SDS-8151
Trusted
TM Industrial Control System
Trusted TM Communications Interface-T8151
ICS Triplex
Technical data sheets are intended for
information and guidance. The Company
has a policy of continual product
development and improvement.
Specifications are subject to change
without notice. For latest information, visit
our Website:-
www.icstriplex.com
BLOCK DIAGRAM
IMB Memory
PSU
Status LEDs
IMB Interface
Processor
Glue Logic
Device
Serial
Ccontroller
Local
Memory
Ethernet
Controller
Ethernet
Drivers
Ethernet
Drivers
Serial Drivers
and Isolation
Serial
Controller
Processor local bus
ELECTRICAL SPECIFICATION
Voltage Range 20 to 32V dc
Power Consumption (excludes PMC) 24W
Isolation Serial device to logic
Channel to Channel
Memory Type and Size SDRAM 128MB
EPROM 512kB
FLASH RAM 3MB
NVRAM 128kB
Number of Ports 2 x Ethernet
4 x Serial
1 x Diagnostics
Serial Port Types RS232
RS232/422/485
RS422/485
Baud Rate (Serial Port) 1.2 to 115.2kBaud
Ethernet Data Rate 10/100Mbit/s
Communications Support TCP/IP/802.3 Ethernet
Modbus RTU slave, Modbus RTU
master, Open Modbus RTU slave
MECHANICAL
SPECIFICATION
Dimensions (HxWxD):
241mm x 30mm x 300mm
(9.5ins x 1.2ins x 11.8ins)
Weight:
1.23kg
(2.71lbs)
ENVIRONMENTAL
Operating Temperature:
-5
°C to 60°C
(23 °F to 140°F)
Operating Humidity:
5 to 95%, non-
condensing
Vibration:
10 to 57Hz
±0.075mm
57 to 150Hz 1.0g
Shock:
15g, ½ sine wave, 11ms
EMI (IEC 801):
ESD
Air discharge to 15kV
Contact discharge to 8kV
Radiated Fields
10V/m, 27MHz to
500MHz
Transients and Bursts
2kV, 2.5kHz for
t=60 seconds