Rockwell Automation 97331001 Gate Scaling Module - Manual

Publication DSSD3P-IN004A-EN-P
Gate Scaling Module (Part No. 97331001)
Installation Instructions
Follow these instructions to properly mount the Gate Scaling Module:
• Mount to a flat, grounded, metal panel.
• Mount in a suitable enclosure, in a clean, dry location. Contamination from
oils, corrosive vapors, and abrasive debris must be kept out of the enclosure.
• Mount in a horizontal position only, in order to provide proper cooling. The
lettering on the face of the unit should be in a readable position, as shown
below.
ATTENTION: Only qualified personnel familiar with DC drives
and associated machinery should plan or implement the installation,
start-up and subsequent maintenance of the system. Failure to
comply may result in personal injury and/or equipment damage.
ATTENTION: To avoid an electric shock hazard, ensure that all
power to the drive has been removed before performing the
following.
Engineered by Engineered by
GATE SCALING
MODULE
INPUT OUTPUT
Part No. 97331001
Notes:
Module Depth = 31.0 mm (1.22 in.)
Mounting Holes: 4.25 mm (0.17 in.)
124.0 mm
(4.88 in.)
138.0 mm
(5.43 in.)
60.5 mm
(2.38 in.)
37.25 mm
(1.47 in.)
(Center Diameter)