Available options, Input configuration, Trusted – Rockwell Automation T812X Trusted Processor Interface Adaptor User Manual
Page 14: Process interface adaptor t812x

Trusted
TM
Process Interface Adaptor T812X
Issue 8 Sep 07
PD-T812X
14
4. Available Options
The following table lists the variants of the Trusted
TM
Processor Adaptor Unit and the Trusted
TM
TMR
Processor options that can be made available by using them. All the variants below will enable the use
of Dual (‘enhanced’) Peer to Peer with other Trusted
TM
systems, using the dxpnc40 I/O definition and
its associated data transfer I/O definitions. The Interface Adapter will not enable Dual Peer to Peer
communication with Plantguard systems.
Variant
Options Enabled
T8120
None.
Basic module with terminations for serial ports and ancillary connections.
T8121
IRIG-B.
Enables decode of IRIG-B002 or IRIG-B122 time synchronisation signals by the
Trusted
TM
TMR Processor.
T8122
Modbus Master.
Enables the Trusted
TM
system to operate as Modbus Master. NOTE: The Trusted
TM
Communications Interface (T815x) is also required for Modbus Master operation. The
serial ports on the Trusted
TM
TMR Processor can only be used for Modbus Slave
operation.
T8123
IRIG-B and Modbus Master
Enables IRIG-B time signal decode and Modbus Master operation.
T8128
Modbus Special Functions (Future use)
Enables customer specific additions to the Modbus protocol.
T8129
IRIG-B and Modbus Special Functions (Future use)
Enables IRIG-B time signal decode and customer specific Modbus additions.
Table 9 Available Options