Rockwell Automation T7454 ICS Regent+Plus AC Isolated Digital Output Module - Manual (Page 9)

(T7454) AC Isolated Digital Output Module
P D - 7 0 1 8 M a r - 0 6
9
1) Set the Module Type:
Position the cursor on the module slot you wish to define.
Choose Set Module Type from the Edit Menu and select
the appropriate digital output module from the list.
2) Edit the Module Definition:
Choose Edit Module Definition from the Edit Menu. A
dialog box will open where you can define the output point
definitions.
Figure 5. Digital Output Module Definition.
3) Edit each point:
Choose Edit from the Module Definition dialog box to
define a name and description for each output point. In
the Digital Output Point dialog, enter names and values
for the configuration fields as described below.
Figure 6. Defining a Digital Output Point.