Rockwell Automation FlexPak Plus DC Drive Field Supply Kit for NRG, RG 14C237 User Manual
Product description
Reliance and MinPak are trademarks of Rockwell Automation.
© 1998 Rockwell International Corporation
Field Supply Kit
for Non-Regenerative and Regenerative
FlexPak Plus DC Drives
Model Number 14C237
Instruction Manual D2-3382
Product Description
The Field Supply kit provides field excitation for shunt-wound DC motors used with 1/4 to 1-1/2 HP
non-regenerative and regenerative FlexPak™ Plus DC drives. The kit is an assembly consisting of a terminal
block, a field power cube, two wiring harnesses, a support bracket, and mounting hardware.
The user must provide appropriate Field Supply wiring to the motor, based upon the motor’s field rating.
The contents of the Field Supply kit are listed in table 1.
!
ATTENTION: Only qualified electrical personnel familiar with the construction and operation of
this equipment and the hazards involved should install, adjust, operate, and/or service this
equipment. Read and understand this manual and other applicable manuals in their entirety
before proceeding. Failure to observe this precaution could result in severe bodily injury or loss
of life.
Table 1 – Contents of the Field Supply Kit
Description
Quantity
Part Number
Field Supply Power Cube
1
701819-12AD
Terminal Block 2TB (32/132)
1
417620-4R
Terminal Block 2TB Section (F1/F2)
2
417621-15A
Support Bracket
1
608878-113R
Wire Jumper 51
1
608808-90SK
Wire Jumper 52
1
608808-90SL
Wire Jumper F1
1
608808-90SM
Wire Jumper F2
1
608808-90SN
6-32 Nylon Washer
1
601748-11H
Mounting Screw, 6-32 x 3/4
1
601741-61F
Mounting Screw, 8-32 x 3/8
3
601741-62C
Cup Washer
1
601748-19A
Ground Screw
1
601741-78D
Field Kit Wiring Diagram
1
705385-72
Instruction Manual
1
D2-3382