Rockwell Automation CS300 Trusted Bridge Module - Manual (Page 13)

Trusted
TM
CS300 Bridge Module
Issue 02 Feb 10 PD-8162 13
3. Application
All CS300 I/O modules are configured using the IEC1131 application Toolset provided with Trusted TM .
This configuration requires entries in the System Configuration (System.INI) for the chassis and
modules and their hardware operational parameters, and also in the workbench I/O connection table,
for software settings and data connection.
3.1. System Configuration
All Trusted TM systems need a system configuration file, specifying the chassis and modules in the
system. For Trusted TM /CS300 hybrid systems, a T8311 Expander Interface is required in the
Trusted TM controller chassis, as for Trusted TM -only systems. An example with Expander Interfaces in
slots 1 and 2 (companion slots) and communications interfaces in slots 7 and 8 is shown below. For
details of the System Configuration Tool please refer to product description PD-T8082.
Figure 7 Trusted TM Processor Chassis with Expander Interface
The CS300 chassis are attached to the Expander Interface as if they were Trusted TM expander
chassis, but the various chassis options for Triguard and CS300 are provided on the ‘Insert New
Chassis’ dialog. Right-click on the background of the configurator window to insert a new chassis.
Figure 8 Insert New Chassis