Rockwell Automation 1440-TB-H XM-947 Dynamic Vibration Terminal Base - Manual (Page 15)

XM-947 Dynamic Vibration Terminal Base 15
Publication GMSI10-IN027A-EN-P - May 2010
Terminal Assignments
XM-160 Direct Vibration Module Terminal Assignments
WARNING
EXPLOSION HAZARD
Do not disconnect equipment unless power has been removed
or the area is known to be nonhazardous.
Do not disconnect connections to this equipment unless power
has been removed or the area is known to be nonhazardous.
Secure any external connections that mate to this equipment by
using screws, sliding latches, threaded connectors, or other
means provided with this product.
ATTENTION
The terminal block assignments are different for different
terminal base units. The following tables apply only to the
XM-947. Refer to the installation instructions for the specific
terminal base unit for its terminal assignments.
No. Description No. Description
0 Chassis 26 Channel 4 Buffer Out
1 Chassis 27 Channel 5 Signal In
2 Chassis 28 Channel 5 Buffer Out
3 Signal Common 29 Channel 6 Signal In
4 Signal Common 30 Channel 6 Buffer Out
5 Signal Common 31 No Connection
6 Signal Common 32 No Connection
7 Signal Common 33 No Connection
8 Signal Common 34 No Connection
9 Signal Common 35 No Connection
10 Signal Common 36 No Connection
11 Signal Common 37 +24V In
12 Signal Common 38 24V Common