Rockwell Automation SA500 Drive Information Guide User Manual
Page 2
![background image](/manuals/581088/2/background.png)
Printed in U.S.A.
S-3024-1
August 1998
Rockwell Automation / 24703 Euclid Avenue / Cleveland, Ohio 44117 / (216) 266-7000
This material is not intended to provide operational
instructions. Appropriate Rockwell Automation Company
instruction manuals should be studied prior to installation,
operation, or maintenance of the equipment.
AutoMax™ is a trademark of Rockwell Automation.
© Copyright Rockwell International Corporation.
This guide is intended to assist you in locating information about DPS and is not exhaustive. The instruction
manuals listed here do not describe specific applications of the standard hardware and software. Always refer
to the wiring diagrams supplied with your system for information specific to your application.
HARDWARE
Specifications for the:
Power Module
S-3018
Appendix A
UDC module
S-3007
Appendix A
Fiber-optic cable
S-3009
Appendix A–E
DC bus supply
S-3017
Appendix A
Connector pinouts for the Power Module
S-3018
Chapter 2
UDC module meter port circuit diagram
S-3007
Chapter 2
Block diagram for the Power Module
S-3018
Appendix G
Block diagram for the UDC module
S-3007
Appendix B
Block diagram for the DC bus supply
S-3017
Appendix B
TROUBLESHOOTING
What happens to data after a STOP ALL in the AutoMax rack
S-3022
Appendix F
UDC module LEDs
S-3007
Chapter 2
Power Module LEDs cross-referenced to UDC dual port memory
S-3018
Appendix D
Accessing the UDC module’s info/error log
J2-3102
Chapter 13
Troubleshooting the fiber-optic link
S-3009
Chapter 4
Troubleshooting the DC bus supply
S-3017
Chapter 4
Troubleshooting the Power Module
S-3018
Chapter 5
Levels of rack access
J2-3102
Chapter 9
INSTRUCTION MANUALS
AutoMax Distributed Power System Overview
S-3005
Universal Drive Controller Module
S-3007
Fiber-Optic Cabling
S-3009
SA500 DC Bus Supply
S-3017
SA500 AC Power Modules
S-3018
SA500 Drive Diagnostics, Troubleshooting, and Start-Up Guidelines
S-3022
SA500 Drive Information Guide
S-3024
SA500 Drive Configuration and Programming
S-3044
AutoMax Programming Executive
J2-3102