Rockwell Automation GMLC Installation Manual - Manual (Page 7)

Starting GML Commander 7
Publication GMLC- 5.3-CDI - March, 1999
tion dialog box appears.
7. Select Yes to remove (uninstall) the GML Commander
program. When the process is finished, “Uninstall com-
pleted” appears at the bottom of the dialog box.
8. If the following message also appears, select Details:
“Some elements could not be removed. You should
manually remove items related to the application.”
9. Remove the items that are listed in the Details dialog box.
These items are usually folders that need to be deleted
from the computer.
Starting GML Commander
To start GML Commander:
1.
From the Window95 or Windows NT Taskbar, select the
Start button. The Start menu appears.
2. Select Programs. The Programs menu appears.
3. Select Rockwell Automation.
4. Select GML Commander with the correct version number.
5. Select GML Commander.
6. The GML Commander application window appears. The
window displays a new, active diagram, which is called
New Diagram. You can save this file with a different
name.