Rockwell Automation MinPak Plus DC Drive Field Supply Kit for NRG 14C228 User Manual

Product description

Reliance and MinPak are trademarks of Rockwell Automation.

Field Supply Kit

for Non-Regenerative MinPak Plus DC Drives

Model Number 14C228

Instruction Manual D2-3380

Product Description

The Field Supply kit provides field excitation for shunt-wound DC motors used with 1/4 to 1-1/2 HP
non-regenerative MinPak™ Plus DC drives. The kit is an assembly consisting of a terminal block, a field power
cube, two wiring harnesses, an Auxiliary Mounting Bracket (M/N 14C209), and mounting hardware.

The user must provide appropriate Field Supply wiring to the motor, based upon the motor’s field rating.

The contents of the Field Supply kit are listed in table 1.

ATTENTION: Only qualified electrical personnel familiar with the construction and operation of
this equipment and the hazards involved should install, adjust, operate, and/or service this
equipment. Read and understand this manual and other applicable manuals in their entirety
before proceeding. Failure to observe this precaution could result in severe bodily injury or loss
of life.

Table 1 – Contents of the Field Supply Kit

Description

Quantity

Part Number

Auxiliary Mounting Bracket

608886-23A

Field Supply Power Cube

701819-12AD

Terminal Block 3TB

49455-93A

Wire Harness 51/52

608813-77R

Wire Harness F1/F2

608813-73R

Mounting Screws, 8-32 X 3/8

601741-62C

Auxiliary Mounting Bracket Kit Instruction Manual

D2-3379

Field Supply Kit Instruction Manual

D2-3380