Rockwell Automation Single Precharge Contactor Replacement Kit for LiquiFlo 2.0 AC Fr 3 Drive Ass'y - Manual (Page 4)

4 Instruction Manual D2-8100
Step 4: Remove the
Cables, Bus Bars,
Stand-Offs, and Old
Contactor
Task Description
Remove the cables at both ends, and remove the bus bars and stand-offs. Disconnect
precharge wiring.
Remove hardware from the bottom of the contactor, disconnect the cables, and leave the
cables in place.
Remove the old contactor.
A
B
C
C
A
C
B
NOTE: Cabinet panels removed for
clarity – not required for installation.
Removing cabinet top panels may
provide better access.