Rockwell Automation RDD-B2153 Rotary Direct Drive Bearingless Motors - Manual (Page 21)

RDD-Series Rotary Direct Drive Bearingless Motor Installation Instructions 21
Publication RDB-IN001A-EN-P — October 2009
Connector Information
Connector information includes the manufacturer part numbers for connector
shells, and contacts for power, ground, and feedback pins.
All connectors are Intercontec SpeedTec type, and include an O-ring installed on
the outer diameter of the cable mounting area.
Specifications
Connector Mount Type Connector Shell (1)
(1) Connector shell does not include power, ground, or feedback contacts.
Power and Ground
Contacts Feedback
Contacts
Feedback, M23 90 degree
swivel mount AEDC113NN00000200000 N/A 61.004.11
Power, M23 BEDC091NN000200000 61.193.11 N/A
Power, M40 CEDE271NN00000051000 61.203.11 N/A
Attribute Value
Temperature, operating 0…40 °C (32…104 °F) (2)
(2) To obtain this thermal rating, mount RDB-x215 motors on a surface with heat dissipation equivalent to a
457.2 x 457.2 x 12.7 mm (18 x 18 x 0.5 in.) aluminum heatsink.
Temperature, storage -30…70 °C (-22…158 °F)
Relative humidity, storage 5…95% noncondensing
Atmosphere, storage Non-corrosive
IP rating (1)
(1) The motor rating excludes any reduction in the rating resulting from cables, plugs, or connections with a lower rating, and
an unsealed customer machine mounting interface.
IP65 - dust tight, water jet (3)
(3) International Protection Code (IP65) is roughly equivalent to a NEMA 12 (industrial use dust tight, drip tight).