Rockwell Automation MPMA Linear Stage Side Cover User Manual
Linear stage side cover, Installation instruction, Install side cover

Allen-Bradley and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Publication MPAS-IN001A-EN-P - August 2011
814055
Copyright © 2011 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Installation Instruction
Linear Stage Side Cover
Bulletin Numbers MPAS, MPMA
Install Side Cover
Follow these steps to install a side cover.
1.
Hold the side cover with the top tilted slightly outward and insert it into
the channel in the base.
The side cover will hook into the base.
2.
Starting at the end cap adjacent to the ground screw, apply Loctite 222 to
one M4 socket head cap screw (SHCS), install, and torque to 4 Nm
(35 lbin).
3.
On the opposite end, apply Loctite 222 to another M4 SHCS, install, and
torque to 2.5 Nm (20 lbin).
TIP
If you are installing the side cover with strip seals in place, use a flat-blade
screwdriver to lift the side cover by inserting the screwdriver under the cover
between the cover and the base.
Side Cover
M4 SHCS
Channel
Ground Screw